![]() |
The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,774. Welcome to our newest member, Chuck Norris
EngravingForum.com -
Domain since Feb 7, 2003
Graver Video Conferencing is empty Join now!
|
ENGRAVING TOOLS - Paypal accepted | Classes | Glossary | Feedback | Tips | Sharpening | Bulino | Videos | Forum Policies |
![]() |
|
Thread Tools |
#1
|
||||
|
||||
![]()
I made some new adapters for the current 120psi CO2 regulator. The old co2 regulator from several years ago was around $180 and required a $38 adapter for the 20oz paintball bottles and a little $8 adapter for the 16 vgram threaded cartridge. The new (from several years ago) 120psi CO2 regulator $83 is integrated to work directly on the 20 oz bottles. Unfortunately then we didn't have a way to use the small 16gram cartridges on it. Anyway I finished some adapters that have a probe in them so we can use the small 16 gram cartridges again that need to be pierced.
These are 16 gram cartridges that we used to use as kids in our pellet guns. I updated the site with this adapter. http://www.airgraver.com/CO2.htm ![]() ![]()
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#2
|
||||
|
||||
![]()
Setup and running more of them, and tried a video.
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#3
|
||||
|
||||
![]() ![]()
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#4
|
||||
|
||||
![]()
Steve,I'll be at the gun show this weekend using the PC with 20oz CO2 Cartridge I'll post pictures. J.J.
__________________
J.J. Roberts School of Artistic Engraving |
#5
|
||||
|
||||
![]()
Great JJ about this weekend. Have a good time! Looking forward to the photos.
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#6
|
|||
|
|||
![]()
Steve how long does one of these 16 gram cartridges last approximately when using the PalmControl? greetings Graham.
|
#7
|
||||
|
||||
![]()
Hi Graham, The 16 gram cartridges get around 20 minutes. The 567gram (20oz) around 8 hours. How long they last is dependent what you are doing. i.e. if digging deep background cuts, not as long as shading or outlining.
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
![]() |
Bookmarks |
Thread Tools | |
|
|