|
The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,763. Welcome to our newest member, mtan1446
EngravingForum.com -
Domain since Feb 7, 2003
Graver Video Conferencing is empty Join now!
|
|||||||
| ENGRAVING TOOLS - Paypal accepted | Classes | Glossary | Feedback | Tips | Sharpening | Bulino | Videos | Forum Policies |
 |
|
|
Thread Tools |
|
#1
02-04-2018, 06:36 PM
|
||||
|
||||
16 gram CO2 cartridge & PalmControl
I made some new adapters for the current 120psi CO2 regulator. The old co2 regulator from several years ago was around $180 and required a $38 adapter for the 20oz paintball bottles and a little $8 adapter for the 16 vgram threaded cartridge. The new (from several years ago) 120psi CO2 regulator $83 is integrated to work directly on the 20 oz bottles. Unfortunately then we didn't have a way to use the small 16gram cartridges on it. Anyway I finished some adapters that have a probe in them so we can use the small 16 gram cartridges again that need to be pierced.
These are 16 gram cartridges that we used to use as kids in our pellet guns. I updated the site with this adapter. http://www.airgraver.com/CO2.htm  
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com 
|
|
#2
02-08-2018, 07:39 PM
|
||||
|
||||
|
Re: 16 gram CO2 cartridge & PalmControl
Setup and running more of them, and tried a video.
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com
|
|
#3
02-08-2018, 07:45 PM
|
||||
|
||||
Re: 16 gram CO2 cartridge & PalmControl
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com
|
|
#4
02-08-2018, 08:37 PM
|
||||
|
||||
|
Re: 16 gram CO2 cartridge & PalmControl
Steve,I'll be at the gun show this weekend using the PC with 20oz CO2 Cartridge I'll post pictures. J.J.
__________________
J.J. Roberts School of Artistic Engraving
|
|
#5
02-08-2018, 10:09 PM
|
||||
|
||||
|
Re: 16 gram CO2 cartridge & PalmControl
Great JJ about this weekend. Have a good time! Looking forward to the photos.
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com
|
|
#6
03-14-2018, 05:35 AM
|
|||
|
|||
|
Re: 16 gram CO2 cartridge & PalmControl
Steve how long does one of these 16 gram cartridges last approximately when using the PalmControl? greetings Graham.
|
|
#7
03-14-2018, 02:32 PM
|
||||
|
||||
|
Re: 16 gram CO2 cartridge & PalmControl
Hi Graham, The 16 gram cartridges get around 20 minutes. The 567gram (20oz) around 8 hours. How long they last is dependent what you are doing. i.e. if digging deep background cuts, not as long as shading or outlining.
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com
|
|
| Bookmarks |
| Thread Tools | |
|
|
