Adapting a dual regulator for a rotary

[Tom_W]

In Steves notes on the Dual regulatory set-up he says "Auxiliary output for rotary handpiece pedal or PalmControl can be adapted to regulator on the right.
"

Does anybody have a photo of how they have done this?


Cheers

T

[Steve Lindsay]

Hi Tom, Here is an older photo of the setup.
Unscrew the barb fitting where the clear line from the airgraver foot pedal connects and screw in a y fitting there. Them reconnect the clear line and also the line to the rotary disc pedal. I have those Y fittings and send them out with the disc foot pedals. The disc pedals are $69 and listed with the airgraver pedals http://www.airgraver.com/Hand_Engrav...OOT%20CONTROLS

[Tom_W]

Order incoming. No hurry needed to send it.

[texasbagpiper]

Is this still the way to do it? My regulator looks a bit different on the classic I just got. Their is only one gauge on mine.

Seth

[Steve Lindsay]

Hi Seth, They were updated 7 or so years ago with some needed improvements. Check the inside front cover of the manual, there is a photo there. Compared to the older model there is the mode selection to shut idle on/off with a switch. Also a built in auxiliary port for a rotary or connecting a palmcontrol. There is also that optional switch to turn on/off the auxiliary.