Would this work?

[Jonessa]

would this compressor work for a palm control classic?

http://www.airpress24.de/product_inf...-HOBBY-X1.html

[mrthe]

You need a compressor with a 1/3 gallon thank , and which work at 60 psi this compressor don't have a tank, don't waste your money in it
You can use something like this
http://wap.ebay.es/Pages/ViewItem.as...ografo&emvcc=0

[Jonessa]

1/3 of gallon so like a liter tank?.....http://www.airpress24.de/product_inf...15-EXPORT.html

[mrthe]

Yes Jonessa a gallon are aprox. 4 liters , you need a tank of 1,5 liters , i use a little aerograph compressor with a 3 liters tank and work well you can buy one in ebay for less of 120 euro

[SEngraver]

Originally Posted by mrthe

You need a compressor with a 1/3 gallon thank , and which work at 60 psi this compressor don't have a tank, don't waste your money in it
You can use something like this
http://wap.ebay.es/Pages/ViewItem.as...ografo&emvcc=0

Mrthe,
This link does not work properly as it only shows the side menu,the rest of the page is blank.
SE

[Jonessa]

ok now I am looking on german Ebay... how about this one?

http://cgi.ebay.de/Aero-Vento-6-SILE...item335f8970ee

[SEngraver]

Hi,
Looks ok for a classic but I am unable to read the specifications in german
SE

Ps You may not be able to connect you other air tools.......

[Jonessa]

Thanks! here is what I could translate :
-oilfree
-1450 U/min.
-there is a pressure meter from 0-8 bars
-6 liter tank
-pressur up to 8 bars
-can suck 115 liters
-0,7 KW - 1 PS
-230 Volt / 50 Hz
- 15 Kg ~32lbs
-66 decibels
-size-530x210x540

Not going lie I know literally NOTHING about compressors. I will be ordering this one in the next few days once I get a response back from Mr. Lindsay about getting a Classic sent over here.I am sooo excited!!

[Roger Bleile]

Sarah,

I think just about any compressor will run a Lindsay AirGraver because they use so little air and very little is bled off as there is with the GRS tools. The compressor you mentioned has a six liter tank. With that tank filled you should be able to engrave for a few hours without having to turn the compressor back on. If you hook your airgraver to a 20 oz paint ball gun tank you can engrave for 2-4 hours with it depending on your stroke setting. 20 oz is .6 liters.

My compressor has a 15 gallon (57 liter) tank. I turn it on and fill the tank then turn it off so it does not automatically turn itself on. I can engrave for about a week before I turn it back on to refill the tank. By doing this way I don't get startled when the compressor kicks on.

Regards,

Roger

[Gemsetterchris]

As said, most likely any compressor will work.
Thing is, oiless is better otherwise you need to have a filter on it, also small tanks need re-filling more often...

So, you either need an expensive silent one or a bigger tank.

Mine is 24ltr, cheap but noisy as hell, but it takes a couple of minutes to fill up (then turn off till empty) & it runs all day or all week depending on use.
Try searching for mecafer which is what i have (maybe your local hardware store has some)? around €100 only.

[Jonessa]

thank you guys for all the help!

[Jonessa]

I just ordered my Classic and my compressor I am like a little kid a few days before christmas right now !

[SVD]

Roger

Remember that that 20oz paintball tank is (mostly) full of liquid CO2 that exands to a much greater volume of gas.

That said, my setup with a 10 gallon tank daisy chained off of the compressor's 2 gallon tank only comes on about once a day using my Classic with foot pedal.

[Deeman]

Howdy, I am new here and wish everyone have a great new year.http://www.handengravingforum.com/im...you%5B1%5D.gif

[Jonessa]

thanks guys! My compressor came today. it is a bit loud but i emptied out my entire walk in closet, it is now my "compressor room" to try to cut down on the noise a bit. Though thankfully I live above a bar and they dont care if I am making a racket at three in the morning with all of my hammering and compressor noises.