![]() |
The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,760. Welcome to our newest member, SamWall
EngravingForum.com -
Domain since Feb 7, 2003
Graver Video Conferencing is empty Join now!
|
ENGRAVING TOOLS - Paypal accepted | Classes | Glossary | Feedback | Tips | Sharpening | Bulino | Videos | Forum Policies |
![]() |
|
Thread Tools |
#1
|
||||
|
||||
![]()
This is a condensed version of the forum thread titled "Cut a practice plate together, Online". I thought it may be helpful to have it in a shorter version.
I'm wondering if it would be helpful if we were to cut a practice plate together? Here is the thought... I could draw up a simple scroll design, upload it and then people could download and transfer it to a practice plate. I would also transfer it to a plate and cut it with the video camera on and then upload the video. We could do it in sections... cutting outline, background removing and then shading... I'll start sketching a quick design that might work. Thought I'd post the rough sketch so that the drawing process can be seen. I like to draw with a .3mm pencil and HB lead. I sketch light to start with and as the design progresses I'll draw darker. ![]() Here is the drawing finished. Not pretty, but finished enough to know the plan for engraving it. ![]() Next open the scanned image in photoshop and increase the contrast. The idea is to get rid of the grays so that we can print and transfer it easy. In photoshop click on Image/Adjustments/Levels... and play with the levels to increase the contrast. Here is what it looks like after that... ![]() Now in photoshop click on: Image/adjustments/Threshold... and adjust the threshold to turn it into nothing but black and white with no grays. Here is what it looks like after that... ![]() It is now ready to print and transfer to the plate. The actual size of the design we will aim for is .9" x .7". Don't print it huge to cover the whole practice plate! I have noticed at shows that people who are learning seem to engrave huge. It is much harder to engrave large than to engrave small! .. plus I find I can get more money for small delicate engavings than large bold stuff. So think small... I promise it will be easier to cut anyway. ![]() The file print size including the white space around the design is: .906" x 1" The design will need to be flipped over before printing and transfered so that it won't be a mirror to the one I'll cut in a video. I have flipped the image and saved it as a tiff file. A tiff file retains the print size. You should be able to download it, open it in your favorite paint program and just click print. Here is the link to the Tiff file... Right click on it and select "save target as" I finished cutting the plate. The file is 15 minutes long and 478 megs big. I tried to upload it at www.youtube.com but it said files have to be under 100 megs. I am using a PalmControl to cut the plate. Outlining videos: http://www.youtube.com/watch?v=7IEdr2XlL4g http://www.youtube.com/watch?v=RGnyHm4Obbw http://www.youtube.com/watch?v=BCN-eBZ9jGI Something that is noticeable through the videos is that I speed up after I get warmed up. I find I do this with shading too. I'll start out slower in the morning and after a few minutes into it I'm up to speed. When ending a cut that has any depth to it, always pop the chip out at the end. If you don't, you'll leave the chip standing up which will cause blood to flow from your finger if you run into it. The exception to popping or flicking out the chip is when a gradual taper is desired at the tail end and then we will want to power out. The tapering or powering out movement is similar to the end of an ice-cream scoop action. I tried to describe this in an earlier beginner video tutorial. The videos at the top that earlier tutorial page illustrate powering out to create a tapered tail end. As Mike mentioned in another thread titled "jumping the ditch", the chip should also be popped out when intersecting a line to prevent crashing into the other side and causing damage to it. In the middle of the Brannen Brothers flute logo engraving video I begin the block lettering. It is an example which illustrates the situation Mike describes. To engrave the block letters more efficiently, first, I use a flat graver without a heel just to stab and square up the ends. Then I use a V graver and intersect the stabs. I time the cut right and just short of intersecting the line I flick the chip out so that it breaks into the intersecting line or stab cut. Another method to prevent jumping the ditch is to just power it through into the intersecting cut but this isn't as fast because you have to be more careful not to go too far. Either way will work though. The graver point used to cut this was a 116.68 degree point. This is the angle of the presharpened gravers that are currently sent out with the AirGravers While cutting the outlines I had the stroke adjustment set so that half of the first exhaust hole was showing and just the start of the next two holes. Air pressure was set around 40 PSI. Here is a pic of the bottom of the tool so that the amount of the three exhaust holes can be seen. ![]() Next step is removing background. I opened the image up in photoshop and used the fill bucket to show what background we will be removing. ![]() As a side note, if part of this were to be inlayed in gold, now would be the time to do that. When I only want parts of the scroll in gold but I cant't decide which parts, I use a yellow pencil on paper or the fill bucket in photoshop to help decide. Open the image in photoshop and select yellow color and then simply click on various stems or leaves to fill them with yellow. Once that is decided, start cutting away those sections and undercutting. Although when cutting away for gold stop short of cutting into the outline of the leaf. Here is a sketch of what I mean... ![]() I won't be inlaying gold in this practice plate. However, if gold were inlayed as I tried to describe above, after going through the sanding grits the next step is simply to scoot the graver in the original V outline cuts that are still around the gold. There will be small pieces of gold laying there that doesn't take much but sliding the V graver around the outline to clean it out. From this point the project is the same as if you didn't inlay gold. Just remove background and shade. I'll be using the dental air drill handpiece made by NSK to cut away and stipple the background. Finished cutting the background. The first video is being uploaded now. There are three videos for background. I could have had it finished some time ago but I fought this silly computer for three hours. These things are supposed to make our lives easier... but I sometimes don't know about that. Maybe I need a Mac like Ray got himself. ![]() Background videos: http://www.youtube.com/watch?v=oRegSU2Z4b8 http://www.youtube.com/watch?v=D1ZHiUZ_eLc http://www.youtube.com/watch?v=c-2Bbmr8I2c ![]() Originally Posted by KDavid: Steve, what size and type of burr are you using? David David, The first bur has a ball end that measures .030". The second is a bur I ground on the diamond lap. It is ground to a shape similar to a regular screwdriver blade. It is tapered so that the tip measures around .010". To make one of these, grind a carbide bur down to a point by installing it in the rotary handpiece, step on the pedal to turn it on and hold the carbide bur against the lap. This will grind the bur into a tapered point. Next place facets on it. The facets are just eyeballed and a bit random. Place your index finger on top of the bur so it doesn't turn while grinding against a lap. Place facets on it and try cutting with it. If it doesn't cut well, hold it back up on the lap and place another flat on. Keep doing this until you get it to cut nice. I have found that a shape somewhat similar to a regular screw driver will usually cut nice. I started using a dental handpiece for background around 1982. The rotary handpiece I used then was made by Buffalo Dental, but I now use a NSK Presto handpiece. Before the rotary I was cutting background out with a flat graver using the impact hand graver. When cutting background using a flat you have to do some recutting with the V next to the leaves and borders adjacent to the background. This was to give a ditch to cut up to when chiseling out with the flat graver. Having to recut, then use a flat graver and then stipple with a punch is a much slower process than buzzing it out with the rotary. After cleaning out a space with the smaller cutter, back out of the space while bouncing it up and down... By doing this we do not have to take another step later to stipple because the rotary did the stippling at the same time. It may take some time to get confidence with the rotary to split lines next to scroll or borders. If you feel less confidant about getting close, it works to first do some recutting with a V so you'll have a wider line to split. The rotary cutter will cut clean on one side of the cut and it throws up a bur on the other side. The clean cutting side is on the right side. Therefore always split the lines next to leaves and borders with the right side. Here are the shading videos http://www.youtube.com/watch?v=4Dn5P98sWYw http://www.youtube.com/watch?v=VnYKJcjULgQ http://www.youtube.com/watch?v=n1nXzrxTIp0 http://www.youtube.com/watch?v=sfowhWrxvzs http://www.youtube.com/watch?v=b-e_hcEHURY Hi Roger, Concerning the graver tapering I used. I was thinking after I saw the shading video that I should have used a smaller faced graver just for the video because I have received questions about this before. When engraving I don't think I'm even thinking about or looking at the size of the graver face. I must only be looking at the tip of the point. This could come from getting used to working under higher magnification as even a small faced graver is going to look big and a person gets used to looking at the actual tip and doesn't notice the meat it is connected to. I used to grind my shading graver down to a tiny face but after years of resharpening it and being too lazy to re-taper it the gravers would get shorter and fatter.... and then I got used to and favored this over a long tapered graver with a tiny tip. I am convinced that a beefy shanked graver will cut better (more efficient) in an impact tool than one that is tapered down long and thin. It has to do with rigidity. I have tried to explain the theory on the graver tapering page. But that being said, I think a thinner shanked graver would have probably been better just for the video. I didn't have a problem seeing the point under the scope but in the video it is harder to see. Here is a pic of that much of the shading. The shading was inked for the photo. When the background is filled in with flat black lacquer color it will appear more evenly matted. The ink for now is only in the shading for this quick picture. ![]() Here is the orginal drawing with quick shading sketched in. ![]() Here are all the videos from the tutorial |
#2
|
||||
|
||||
![]()
nice job
you should do this for a living!
__________________
CoinCutter |
#3
|
|||
|
|||
![]()
Sounds like you know what you are doing. Whats your name again. Jack:yesnod:
|
#4
|
||||
|
||||
![]()
Steve,
Brilliant idea. I'm on board. I don't have photo shop so I am going to print this whole section, cut out the outline that you finalized size it down and reverse it on a copy machine and then transfer it. Rich Hambrook ![]() |
#5
|
|||
|
|||
![]()
Hello Just signed up, Thanks!!!
|
#6
|
||||
|
||||
![]()
Thank you Steve for this video, i will have to try it.
|
#7
|
||||
|
||||
![]()
Receive an email that he wasn't finding this cut together practice plate thread. Here it is.
This one is the condensed version. The full original thread is here: "Cut a practice plate together, Online"
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
#8
|
|||
|
|||
![]()
I'm going to give this a try, with a scope that I should have today. Your comment Steve that cutting large designs are more difficult got my attention. In watching you cut a backbone you are able to rotate the work 360 plus degrees without stopping how do you do that? You have third hand or something
![]() |
#9
|
||||
|
||||
![]() Quote:
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com |
![]() |
Bookmarks |
|
|