|
The Internet's Largest and Fastest Growing Engraving Community
Discuss hand engraving using basic to the most advanced methods and equipment
Forum Members: 14,764. Welcome to our newest member, mushroom09@mac.com
EngravingForum.com -
Domain since Feb 7, 2003
Graver Video Conferencing is empty Join now!
|
|||||||
| ENGRAVING TOOLS - Paypal accepted | Classes | Glossary | Feedback | Tips | Sharpening | Bulino | Videos | Forum Policies |
 |
|
|
Thread Tools |
|
#1
03-08-2017, 08:47 AM
|
|||
|
|||
Ngraver liners
I have some Ngraver liners. They come with a 1/8" shank. Am I correct in thinking 1/8" shank is OK to use in my palm control.
Thanks for reply.
__________________
festina lente make haste slowly A. Caesar 
|
|
#2
03-08-2017, 11:46 AM
|
||||
|
||||
|
Re: Ngraver liners
Hi Gail, The tool hole in the nose of the airgraver is .133" in diameter. Sny shank that will fit that will work. So if the shank is 1/8" round it will fit. If it is 1/8" square it will not fit. Chamfer the end of the shank a little before inserting so it doesn't catch on the nose oring.
__________________
__________________________________ Steve Lindsay AirGraver.com EngravingArtist.com
|
|
| Bookmarks |
|
|
